office (440) 344-1201
toll free 888-786-8688
email YourDoorGuy@hotmail.com
online www.YourDoorGuy.Com

Haas Aluminum Sectionals

Model 110

Model 110, 220

Haas Door models CA-220 and CA-110 Aluminum Sectional Doors are strong, handsome, and durable, and the No. 1 choice of commercial and industrial architects. Ideal for fire houses, car washes, auto service centers and dealerships, service stations, and tire stores.
1102

Models CA-110-Narrow Line Frame


Sections are assembled using .065" minimum aluminum alloy, tubular type extrusions with through bolt construction. Sections are 1-3/4" thick. Any Section height is available. Bottom rails, top rails and end stiles are 3" on doors up to 13'-11" wide. Doors greater than 13'-11" wide have 4" bottom rails. All doors wider than 12'-2" have built in struts on each section. All aluminum is clear anodized as standard. Color anodizing and special paint finishes are optional. Panels for solid sections are .040" stucco embossed aluminum. A wide variety of glazing materials are available.
2203

Models CA-220-Heavy Duty Frame


Sections are assembled using .065" minimum aluminum alloy, tubular type extrusions with through bolt construction. Sections are 1-3/4" thick. Any Section height is available. Bottom rails, top rails and end stiles are 4" on doors up to 18'-2" wide. Doors greater than 18'-2" wide have 6" bottom rails and top rails. All doors wider than 12'-2" have built in struts on each section and doors greater than 18'-2" wide have an additional "T" shaped cap strut on all sections. All aluminum is clear anodized as standard. Color anodizing and special paint finishes are optional. Panels for solid sections are .040" stucco embossed aluminum. A wide variety of glazing materials are available.
Commercial
Aluminum Rail/Stile Dimensions
Commercial
Aluminum Panels
Models
CA-220
CA-110
Door
Width

Panels
Wide

Width
up to
8'-0"
to
16'-2"
16'-3"
to
18'-2"
18'-3"
to
24'-2"
8'-0"
to
13'-11"
14'-0"
to
16'-2"
up
to 8'-11"
2
Center
Stiles

2-1/2"
2-1/2"
2-1/2"
1-5/16"
1-5/16"
9'-0"
to 11'-11'
3
End
Stiles
4"
4"
6"
3"
3"
12'-0"
to 15'-11"
4
Top
Rail

4"
4"
6"
3"
3"
16'-0"
to 19'-11"
5
Meeting
Rail

4"
4"
4"
2-1/2"
2-1/4"
20'-0"
to 21'-11"
6
Bottom
Rail

4"
6"
6"
3"
4"
22'-0"
to 24'-2"
8

CA-110/220 Specifications

CA-110/220
Specifications
1.03
- Section Includes
  1. Type: Sectional
    doors are to be Models CA-110 and CA-220 as manufactured by Haas Door
    Company.
  2. Operation: To be
    manual push-up counterbalanced, chain hoist, or electric operation (supplied
    by others).
  3. Mounting: To be
    interior face mounted on a prepared surface.

 

1.04
- Related Work
  1. Opening preparation
    miscellaneous or structural steel, access panels, and finish or field
    painting are in the scope of work of other sections or trades
Part
2 - Product
2.01 - Materials/Construction
  1. Sections: Shall
    be 1 3/4" thick full tubular aluminum framework with .125" wall thickness
    at all hardware attachment points. Vertical stiles and hotizontal rails
    shall be miter cut and joined with internal steel 1/4" thru-bolts."
    Horizontal meeting rails shall have ship-lap overlap joints.
  2. Door Panels: Shall
    be 18-gauge stucco embossed or smooth clear anodized aluminum sheet
    (6063T6 alloy/.055" thick) set in a continuous vinyl snap-in glazing
    bead.
  3. Glass Panels: Shall
    be set in a continuous vinyl gasket and held in place by inside vinyl
    snap-in glazing bead. For 1/2" thick tempered glazing, aluminum snap-in
    bead is used. (Note: Glazing is 1/8" or 1/4" acrylic or 1/2" tempered.)
  4. End Stiles: Shall
    be integral extruded aluminum framework.
  5. Intermediate Reinforcing:
    Shall be integral extruded tempered aluminum framework, to provide reinforcing
    for attachment of various hardware.
  6. Bottom Section:
    Weatherstrip to be a "U"-shaped astragal of flexible extruded vinyl.
  7. Finish Coat: Shall
    be clear anodized aluminum.
2.02
- Counterbalance
  1. Spring Counter
    Balance: Shall be factory calibrated springs to match site specifications.
    Shall be helical torsion-type made from oil-tempered wire to provide
    a minimum of 10,000 cycles.
  2. Spring Options:
    To be helically wound, oil-tempered springs.
  3. Strapeze: Counterbalance
    System Option: Shall be factory calibrated counterweight counterbalance
    system designed to provide ease of installation, high cycle life and
    low maintenance.
  4. Assembly: Shall
    be contained on a continuous steel shaft retained in ball bearing brackets,
    with high-strength galvanized aircraft cable with a minimum 7 to 1 safety
    factor
2.03
- Tracks
  1. Vertical Tracks:
    Shall be a minimum of 16-gauge galvanized steel tapered and mounted
    to provide wedge-type-sealing action (2" track or 3" track depending
    on door size).
  2. Horizontal Tracks:
    Shall be a minimum of 16-gauge galvanized steel reinforced with a minimum
    of 13-gauge galvanized angles, as required (2" track or 3" track depending
    on door size).
2.04
- Locking
  1. Slide Bar Lock:
    Shall be an inside spring-loaded lock, mounted on the end stile and
    shall engage a slot in the vertical track.
2.05
- Hardware
  1. Hinges: Shall be
    manufactured of hot-dipped galvanized steel, 14-gauge minimum.
  2. Rollers: Shall
    be full floating ball bearing case hardened steel races, mounted to
    fit the slope of the track (2" or 3" suite the track).
Part
3 - Execution
3.01 - Installation
  1. Installation: Shall
    be by a Haas Door Company authorized representative and shall comply
    with all relevant Haas Door Company standards and instructions
Part
4 - Warranty
4.01 - Unlimited Warranty
Haas Door
Company Warrants each door and all component parts to be free from defects
in material and workmanship for a period of one (1) year from the date of
delivery to the original purchaser.

Optional Features Sizes up to:
  • COLOR ANODIZING
  • CUSTOM PAINTING
    (COLOR MATCHING)
  • SPECIAL GLAZING
    MATERIALS
  • 1/2" INSULATED
    PANELS AND GLAZING
  • DOUBLE STEEL
    END STILES
  • 3" EXHAUST
    PORT
  • THREE SECTION
    PASS DOORS
  • FOUR SECTION
    PASS DOORS
  • ADDITIONAL
    U-BARS
  • THERMAL INSULATED
    WINDOWS
  • FULL VIEW
    SECTIONS (1-3/4" DOORS ONLY)
  • CAM SAFETY
    DEVICE
  • SPRING BUMPERS
  • CHAIN HOIST
  • EXTENDED
    CYCLE TORSION SPRINGS
  • STRAPEZE
    COUNTER-BALANCE SYSTEM
  • EXTENDED
    TRACK
  • HIGH-LIFT
    AND VERTICAL LIFT TRACK